Related products
Шинэ
Hempel Speed Dry Alkyd 43140 is a very quick-drying anti corrosive primer/finish pigmented with zinc phosphate as anti corrosive inhibiting pigment for steel.
Recommended use:
Hempel Speed Dry Alkyd 43140 is formulated as a single/double coat anti corrosive primer/finish for steel structures and general steel work. Suitable for a multitude of applications for heavy and light steel industry, where quick drying properties are required. It is for general use, in exterior and interior steel surfaces. Suitable for protection of steel in mild to medium atmospheric corrosive environments.
Very fast drying properties, perfect solution for in shop application
Excellent overcoatability with itself or similar alkyds, with Hempathane and Hempadur. Good overcoatability with Hempalin and Hempatex
Good results with most means of application including brush
Good adhesion to steel
Friendly for both user and environment, does not contain any lead and chromate's.
Шинэ
Hempel's HS Gas Pipe Coating 87831 is a two-component epoxy polyamine cured coating. Formulated according to the requirements in AMERICAN PETROLEUM INSTITUTE'S STANDARD RP 5L2.
Шинэ
HEMPADUR 85531 is an amine-adduct, cured epoxy coating. It is a hard, impact and abrasion
resistant coating eg for exterior pipelines. The material has excellent properties in respect of
temperature resistance, mechanical and chemical resistance and cathodic disbondment resistance
Шинэ
Ceramic wear protection for plant components subject to extreme wear and temperature stresses
Шинэ
Шинэ
Шинэ
Шинэ
Supplied-Air Respirator: Apollo 600 HP and LP
Шинэ
High-build Concrete Resurfacer Coating
Шинэ
Nukote FR is a fast set, Class 1 fire-rated, multi component, 1:1, 100% solids, hot liquid applied, modified polyurea liner system for wood, metal, concrete, fibreglass and other substrates. Nukote FR is designed as a fire rated membrane and also performs well in anticorrosion and waterproofing applications on steel, concrete, and many other substrates. Nukote FR can be applied at temperatures ranging from-22° to 250° F (-30° to 120° C). Nukote FR displays excellent fire resistance properties, chemical resistance, and thermal stability and UV resistance. Nukote FR exhibits very good resistance to aggressive termites. Its moisture insensitivity makes it suitable for application on wooden utility poles.
Шинэ
Nukote Classic is a single pack product based on a patented technology. Nukote Classic is a solvent free, TDI free, single component, liquid applied, water catalyzed, polyurethane elastomeric waterproofing base membrane suitable for horizontal and vertical applications on concrete, metal wood and masonries. Nukote Classic with compatible top coats are installed as a flooring system for high traffic pedestrian, vehicular traffic, commercial and industrial floors.
Шинэ
Nukote Chemshield MS is a plural component system composed of metals and ceramics in a polymeric binder, providing excellent performance in corrosive, chemical and abrasive environments, at ambient or elevated temperatures. This product is designed for industrial use at elevated temperatures and will maintain its gloss, physical properties under continued exposure at high constant temperature in exposed conditions. Nukote Chemshield MS is resistant to spillages of many solvents, chemicals including high levels of hydrochloric acid, sulphuric acid mineral spirits, cutting oil, sulphur fumes, seawater, in ambient or elevated temperatures. Chemshield MS is also suitable in cryogenic applications.
Шинэ
Nukote Chemshield CW compounds are paste of metals and ceramic in a polymeric binder to be used as a repair, rebuild and resurfacing product, providing excellent performance in corrosive, chemical and abrasive environments, at ambient or elevated temperatures for both ferrous as well as nonferrous metals. These products are designed for industrial use at elevated temperatures and will maintain its physical properties under continued exposure to high constant temperature both in exposed as well as immersion conditions. Nukote Chemshield Cold weld compounds are resistant to many solvent, chemicals including hydrochloric, sulphuric acid, alkalis, mineral spirits, cutting oil, sulphur fumes, seawater, in ambient as well as elevated temperatures. The products are available in different grades and specific purposes. Chemshield CW is used as a high strength structural adhesive and also suitable in cryogenic applications. This product can be used in most applications in combinations with other nukote ceramic coating assortments.
Шинэ
Nukote ALU-FR is high solids, aliphatic, single component, liquid applied, moisture cured, fire rated urethane topcoat for polyurea or polyurethane or hybrid elastomeric waterproofing membranes. Nukote ALU-FR may be used as a standalone coating in light duty applications over primed wood, metal, concrete and asphalt. It offers good flexibility, color stability and weather resistance
Шинэ
NUKOTE AL® is NCSI’s multipurpose high performance aliphatic polyurea designed and developed to perform well
for anticorrosion and waterproofing applications on steel, concrete, and many other substrates requiring high degree
of UV and color stability. This coating is extremely color stable and displays excellent UV weathering characteristics,
chemical resistance, high abrasion resistance, and gloss retention property. It is a two-component, 100% solids, pure
polyurea that significantly reduces the moisture problems that commonly cause pin holing and blistering in most
polyurethane, polyurethane-hybrid and other organic coating systems. . Nukote AL can be textured easily for antiskid purposes. The product has very good moisture permeation resistance and performs as an excellent barrier coating.
Nukote AL provides excellent adhesion to most substrates when used with a suitable Nukote primer.
Шинэ
Belzona SuperWrap II offers a new generation repair solutioA 2-part polyurethane resin designed for the repair, rebuilding and coating of rubber and metal components. This flexible rubber repair material is appropriate for applications where high build, durability, elasticity, high abrasion and tear resistance are required. This material is easy to mix and apply without the need for specialist tools and it cures at room temperature eliminating the need for hot work.n for restoring the strength of corroded, weakened and holed pipe and tank walls. It is comprised of a fluid-grade resin system, a bespoke hybrid reinforcement sheet, based on fibre glass and carbon fibre, as well as release film to consolidate and finish off the application.
Шинэ
Belzona SuperWrap II offers a new generation repair solution for restoring the strength of corroded, weakened and holed pipe and tank walls. It is comprised of a fluid-grade resin system, a bespoke hybrid reinforcement sheet, based on fibre glass and carbon fibre, as well as release film to consolidate and finish off the application.
Шинэ
A 2-part paste-grade epoxy composite material combining abrasion resistant ceramic aggregates in a polymeric binder for the repair and protection of equipment operating at temperatures up to 200⁰C (392⁰F).
Шинэ
A 2-part epoxy-based repair composite designed for metal repair and protection against the effects of erosion and corrosion. This solvent-free repair composite has excellent chemical resistance and will bond to all metals and most other rigid surfaces. It is easy to mix and apply without the need for specialist tools and it cures at room temperature eliminating the need for hot work. It is ideally suited to be overcoated with to ensure long-lasting performance.
Шинэ
A 2-part composite material for metal repair based on a silicone steel reinforced polymer system. Due to its fast-curing characteristics, this repair material is ideal for emergency repair situations. It can be machined using conventional tools and provides a permanent metal bonding or rebuilding solution
Шинэ
A 2-part surface-tolerant epoxy composite engineered specifically for in-situ application to wet, oil contaminated and underwater surfaces. This multi-purpose solvent-free material exhibits rapid cure and excellent adhesion to manually prepared substrates, where grit blasting cannot be achieved.
Шинэ
A 2-part epoxy metal repair composite with self-lubricating properties for creation of low friction surfaces and protection of lubrication systems from wear and seizure in the event of lubrication loss. This solvent-free repair composite has a unique microporous structure which allows it to trap and hold lubricating oil, minimising friction at start-up and improving the efficiency of mechanical equipment such as pumps. It has outstanding chemical resistance and will bond to almost any rigid surface without the need for hot work.
Шинэ
A 2-part repair composite for metal repair and resurfacing based on solvent-free epoxy resin reinforced with silicon steel alloy. This repair material has been developed to offer an extended working life, ideal for large applications where greater volumes of material are required or to provide adequate working time at higher temperatures. Belzona 1121 (Super XL-Metal) will not corrode and resists a wide range of chemicals. It is easy to mix and apply without the need of specialist tools and can be machined using conventional tools.
Шинэ
A 2-part repair composite for metal repair and resurfacing based on solvent-free epoxy resin reinforced with silicon steel alloy. This repair material will not corrode and resists a wide range of chemicals. It is easy to mix and apply without the need of specialist tools and can be machined using conventional tools.
Шинэ
Hempadur Zinc 17360 is a two-component, zinc rich epoxy primer. It cures to a hard wearing and highly weather-resistant coating. Offers cathodic protection of local mechanical damage. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.
Шинэ
Hempathane PW 35660 is a two-component, 100% volume solids, high build, flexible, aromatic polyurethane paint, which cures to a coating with good resistance to fresh water. It can be hot applied by dual feed equipment. Its fast handling properties and reliable application method enable a more efficient workshop output and pave the way for maximising production.
Шинэ
HEMPADUR MULTI-STRENGTH 45851 is a self-priming, two component high build polyamide/amine cured epoxy paint which cures to an abrasion resistant coating with good resistance to water. It cures down to 0°C/32°F.
Шинэ
Hempadur Multi-Strength 45753 is a self-priming, high-build, pure epoxy coating which cures to an abrasion and corrosion resistant coating. Applicable by standard heavy-duty airless spray equipment. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.
Шинэ
Hempadur 35620 is a solvent-free two component epoxy paint, which cures to a hard and tough coating
with good resistance to abrasion and seawater.
Шинэ
HEMPADUR 35520 - solvent free, fast drying highly structured
an epoxy paint that dries to a coating with good resistance to
fresh water.
Шинэ
HEMPADUR PRO ZINC 17380 is a two-component, zinc rich epoxy primer. Offers cathodic protection of local mechanical damage.
Шинэ
HEMPADUR ZINC 17340 is a two-component zinc rich epoxy paint. It cures to a strong and corrosion resistant coating.
Шинэ
Quick-drying alkyd primer. Contains zinc phosphate for enhanced corrosion protection. It is used as a general-purpose primer for steel protection in atmospheric environments with low to medium aggressiveness.
Шинэ
Hempadur Avantguard 550 is an activated, zinc epoxy primer in compliance with the requirements of Level 3, type II in SSPC Paint-20, 2019. Hempadur Avantguard 550 functions as a zinc-rich epoxy featuring a higher mechanical strength. The product is in full compliance with ASTM D520 type II and EU Directive 2004/42/EC, the Paints Directive on the limitation of volatile organic compounds: subcategory j.
Шинэ
100% Solids, Highly chemical resistant and wear resistant, low viscosity, thin film 100% Novolac epoxy.
Шинэ
Highly chemically resistant, 100% solids, pure novolac resin-based, quartz reinforced concrete resurfacer.
Шинэ
100% solids, modified epoxy formulation, reinforced with a proprietary blend of ceramic beads and powders for fine particle, abrasive sliding wear environments.
Шинэ
100% solids, ceramic reinforced thin film coating to protect structures against erosion, abrasion, and corrosion.
Шинэ
100% solids, impact resistant, ceramic reinforced, epoxy/urethane hybrid for severe abrasive wear and impact resistance.
Шинэ
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book.
Шинэ
100% solids, ceramic reinforced, multi-component hybrid system, formulated for extreme sliding-wear, abrasion and impact caused by medium to coarse particle flow.
Шинэ
100% solids, modified epoxy formulation, reinforced with a proprietary blend of ceramic beads and powders for extremely abrasive sliding wear environments.
Шинэ
100% solids, ceramic reinforced, thin film coating to protect metal against chemicals, abrasion, and corrosion.
Шинэ
100% solids, thick film, ceramic reinforced abrasion control epoxy compound formulated to protect metal surfaces subjected to erosion, corrosion and chemical attack.
Шинэ
A machinable polymer alloy blend used to resurface scored and pitted regions which may be machined at a later stage to tight tolerances.