Products
Brands
Шинэ
A 2-part epoxy-based repair composite designed for metal repair and protection against the effects of erosion and corrosion. This solvent-free repair composite has excellent chemical resistance and will bond to all metals and most other rigid surfaces. It is easy to mix and apply without the need for specialist tools and it cures at room temperature eliminating the need for hot work. It is ideally suited to be overcoated with to ensure long-lasting performance.
Шинэ
A 2-part composite material for metal repair based on a silicone steel reinforced polymer system. Due to its fast-curing characteristics, this repair material is ideal for emergency repair situations. It can be machined using conventional tools and provides a permanent metal bonding or rebuilding solution
Шинэ
A 2-part surface-tolerant epoxy composite engineered specifically for in-situ application to wet, oil contaminated and underwater surfaces. This multi-purpose solvent-free material exhibits rapid cure and excellent adhesion to manually prepared substrates, where grit blasting cannot be achieved.
Шинэ
A 2-part epoxy metal repair composite with self-lubricating properties for creation of low friction surfaces and protection of lubrication systems from wear and seizure in the event of lubrication loss. This solvent-free repair composite has a unique microporous structure which allows it to trap and hold lubricating oil, minimising friction at start-up and improving the efficiency of mechanical equipment such as pumps. It has outstanding chemical resistance and will bond to almost any rigid surface without the need for hot work.
Шинэ
A 2-part repair composite for metal repair and resurfacing based on solvent-free epoxy resin reinforced with silicon steel alloy. This repair material has been developed to offer an extended working life, ideal for large applications where greater volumes of material are required or to provide adequate working time at higher temperatures. Belzona 1121 (Super XL-Metal) will not corrode and resists a wide range of chemicals. It is easy to mix and apply without the need of specialist tools and can be machined using conventional tools.
Шинэ
A 2-part repair composite for metal repair and resurfacing based on solvent-free epoxy resin reinforced with silicon steel alloy. This repair material will not corrode and resists a wide range of chemicals. It is easy to mix and apply without the need of specialist tools and can be machined using conventional tools.
Шинэ
Hempadur Zinc 17360 is a two-component, zinc rich epoxy primer. It cures to a hard wearing and highly weather-resistant coating. Offers cathodic protection of local mechanical damage. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.
Шинэ
Hempathane PW 35660 is a two-component, 100% volume solids, high build, flexible, aromatic polyurethane paint, which cures to a coating with good resistance to fresh water. It can be hot applied by dual feed equipment. Its fast handling properties and reliable application method enable a more efficient workshop output and pave the way for maximising production.
Шинэ
HEMPADUR MULTI-STRENGTH 45851 is a self-priming, two component high build polyamide/amine cured epoxy paint which cures to an abrasion resistant coating with good resistance to water. It cures down to 0°C/32°F.
Шинэ
Hempadur Multi-Strength 45753 is a self-priming, high-build, pure epoxy coating which cures to an abrasion and corrosion resistant coating. Applicable by standard heavy-duty airless spray equipment. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.
Шинэ
Hempadur 35620 is a solvent-free two component epoxy paint, which cures to a hard and tough coating
with good resistance to abrasion and seawater.
Шинэ
HEMPADUR 35520 - solvent free, fast drying highly structured
an epoxy paint that dries to a coating with good resistance to
fresh water.
Шинэ
HEMPADUR PRO ZINC 17380 is a two-component, zinc rich epoxy primer. Offers cathodic protection of local mechanical damage.
Шинэ
HEMPADUR ZINC 17340 is a two-component zinc rich epoxy paint. It cures to a strong and corrosion resistant coating.
Шинэ
Quick-drying alkyd primer. Contains zinc phosphate for enhanced corrosion protection. It is used as a general-purpose primer for steel protection in atmospheric environments with low to medium aggressiveness.
Шинэ
Hempadur Avantguard 550 is an activated, zinc epoxy primer in compliance with the requirements of Level 3, type II in SSPC Paint-20, 2019. Hempadur Avantguard 550 functions as a zinc-rich epoxy featuring a higher mechanical strength. The product is in full compliance with ASTM D520 type II and EU Directive 2004/42/EC, the Paints Directive on the limitation of volatile organic compounds: subcategory j.
Шинэ
100% Solids, Highly chemical resistant and wear resistant, low viscosity, thin film 100% Novolac epoxy.
Шинэ
Highly chemically resistant, 100% solids, pure novolac resin-based, quartz reinforced concrete resurfacer.
Шинэ
100% solids, modified epoxy formulation, reinforced with a proprietary blend of ceramic beads and powders for fine particle, abrasive sliding wear environments.
Шинэ
100% solids, ceramic reinforced thin film coating to protect structures against erosion, abrasion, and corrosion.